Maxtor DiamondMax D540X 40 GB Hard Drive "drive recognized bios" Questions

...BIOS? Thanks. Lisa You need to set the little jumpers at the rear of the hard drive and the cd rom drive. Set the hard drive as Master and the cd rom as Slave. Both devices should then be

drive D540X-D4. It's recognized like a romulus with 0 bytes. I cannot formatt it or something like that. I suspect It can be solved installing(reinstalling) the correct firmware. Does anybody know how

...the hard drive Hey! i want to ask your that your hard drive is visible in the BIOS or not? If not and you want to recover your data then you need to take help from a data recovery

...bios i have an extra hard drive i installed on a winme operating system...bios recognizes it but it doesnt show up in my computer i installed it correctly switching it to the slave drive Can you boot ...

...might not support the drive size, in which case look for a BIOS update for your system. You also might want to use "cable select" on the switches even though you set it to slave it may not like

...recognized in XP Installation I have bought Maxtor 6l300s0 300 GB HDD with my HP DeBranded Pentium D 3.0 GHz Media Center PC but on XP installation it is not recognizing HDD, message "No Mass storage ...

...drive? Thanks for any help. Yes, If your partition isn't being recognized than windows has no way of reading the information. thats why windows create partitions to determine the amount of space and ...

Drive is recognized in there??? Most of the time you have to set the bios to recognize a Sata drive because 90% of Hard Drives are still IDE and most bios software is still recognizing the IDE drives.

...Bios V1.05 The drive is too big for the BIOS to recognize. 2 options: A bios update from the board maker Use smaller drives. If you are planning a RAID many RAID controllers have size limits as

drive. The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 means Sec master ? IDE-3 means Sec slave ?