Infinity Reference 1052W Subwoofer - 10" Dual 4 Ohms Polypropylene Cone Butyl Rubber Surround Car Speaker "subs dont sound loud" Questions

dont know whats wrong? Sounds like the sub is blown. Swap the two subs and see if the sound comes from the other sub in the original location as well. If not, then you have a bad sub. If the bad sound

...Subs blew out but I dont know why?? I bought a 4 fared cap, 500/1 jl audio amp, 200/4 alpine amp and 2 w3V2 jl audio subs about 1 year and a half ago. I was hittin real hard but I had no complaints ...

...but there is also this # J261-834100 neither of the numbers say: they dont sound loud because you need to use the DUAL voice coils and make it 2 Ohms. Google " how to bridge a dual voice coil

dont sound very clear how can i make it clear and loud ? Make sure to tune the amp according to the subs. Turn all the levels down on the amp, then start with turning up the gain till you can tell the

subs as well, if this occurs and you still are not satified, you either have to get a car receiver with a non fading subwoofer preout, or you could get bass blockers for all the speakers you dont want

...dont know how thiscould be seeing as in a barely played it and i didnt turn it up loud at all and now it wont make a sound at al.. I checked to see if power was goig through and power reaches all the ...

...subs to play highly powered. More air flow - better cooling of the voicecoils. Sealed enclosures dont like much power because the coil cannot breathe and heats up rather quickly. Its up to you, and ...

...dont authorize repair shops access to their voice coils. however i can sell you a new sub with full JL factory warranty drop shipped to your door for about 475$ or I could do you a way better sub ( ...

...are touching. Make sure that the master volume on the amp is turned down. You dont need this to be on loud at all, in fact far from it or you'll risk damaging both the amp and subs! Hope this

...subs available) (86dB). (36-44mm Xmax (adjustable for SQ or SPL) If you are looking for SPL, High XMax, Low sensitivity, and lots of power is the way to go. Generally, to increas SPL by 3dB, yuo must ...