Pioneer TS-W301R Car Subwoofer "subs" Questions

i have 2 kicker l7's 4ohm, how do i wire them down to 2ohm? If the subs are dual 2 ohm voice coils..... For a each sub, connect one of the "+" terminals on the sub to one of the "-" terminals. This ...

5 stage band pass sub box, 1 sub stolen, box built to spec subs I had a very exp. comp. spec. box built for 2 older rockford power 12" subs the chrome donut magnet model. This box was specd for these ...

subs not working. my sub turns on just fine, connections are fine. when i play music my sub has constant static going through it, thats all you hear. i have the stock bose speakers, kenwood headunit, ...

...- of that sub to the - on the amp. NOTE IF YOUR AMP IS BRIGED THIS IS A 1 OHM LOAD!! IF THE TOO SUBS ARE ON ONE CHANNEL THIS IS A Two OHM LOAD IF YOU ARE RUNNING 8 OHM SUBS THEN YOUR AT 4OHM PER ...

SUB WOLFER WIRING HOW DO I WIRE 2 OHM SUBS INTO A DIRECTED 1500D MONO BLOCK AMP im assuming you have 2 subs that are DVC? if thats the case, wire from the positive on the amp to the positive voice ...

...It's possible that the sub is blown, but it may be something else. You did not specify how the subs are wired to the amp, how many channels on the amp, or whether or not the CVR's are in

...amp. Will the my sub woofers, or amp blow out or get damaged. Are those rms wattage? Anyways, your subs (if you have two) will double the power of your amp, meaning your amp will be under powering ...

2 dvcoil 4ohm.subs, need 2 ohm load total for monoblok.amp. how do I wire.it If you run one sub with the DVCs in parallel, you would get 2 ohms. If you run both subs with all DVCs in parallel, you ...

...it was my amp so i went an had it check, they said it wasn't my amp. so they check my subs it was the subs. It may not be the subs, but the amp could have caused the subs ...

both subs quit at the same time - kkkjohnson - Please clarify your question.  Do you mean they stopped working all together.-First make sure the amp going to the subs is still working.