Pioneer VSX-516-K/S Amplifier "sub" Questions

which terminals should I use to hook up my M-CR502 receiver to a BX10 sub woofer If the BX10 is a powered sub. Then there should be a subwoofer out socket on the Receiver. If it doesn't have one it ...

hi all i have a Denon DRA 455 with Eltax Linear 6.5 wich is 8ohms i have a sub but no sub output, apart from sharing power between them, how can i hook these up please? thanks You did not state if ...

System just got hooked a couple months ago and was listing to it loud and the sub quit working no blown fuses and amp light on but no sub it did it once before and had to turn off car to get sub back ...

connecting powered subwoofer triggers protection switch The powered sub should only be connected to the unit if the amp has a socket for a powered sub. If the sub is connected via the normal speakers ...

2 speakers and 1 powered sub I have a CE1000. On the back there are the red and black 2 prong inputs for speakers as well as the other larger round speaker connection under that. I was wanting to ...

...mixing amplifier. I can find any label on the back of it to tell me where to hook up my power subwoofer to this amplifier. Please help! Thanks The unnamed sub itself would dictate what you need ...

wondering if non soldered terminals will cause subwoofers to cut in and out...amplifier turns on and stays lit green but subs cut in and out...have had amp and subs switched over from another vehicle ...

How do I connect a subwoofer? Subwoofer: Where do I connect a subwoofer? Fred the amp should have a sub out if not ,you can check if the sub can take a speaker level input so that you can connect one ...

...amp. Could I have all three running off this one amp? Or would the touching wires be an issue? The sub speaker is normally connected to a sub outlet on the amp because the sub circuit outlet is ...

how to get two M-282's to power one non-powered sub how to get two M-282's to power one non-powered four wired (left/right) sub? I have the pre-out sub woofer connection from my TX-SR-573 to one M-282