Plantronics - Bluetooth Headset Plus Base & Headset "earpiece flashing red blue" Questions

...earpiece back on again the same way. You should have a slow flashing blue light on the mic boom. The base station will now try to find the earpiece and within about 20 seconds the red light on the ...

the earpiece is flashing blue, I've found it take about 30-45 seconds for the base to pick it up and pair again. You'll know it found it when the red light becomes solid and the blue upper light glows

...the light will be red next: turn on the earpiece again the light will flash blue and, the cell will find the earpiece the earpiece will flash blue slowly; once a minute close the cell; use the ...

...earpiece for about 5 seconds. You should get a slow flashing blue light on the mic boom. Wait for about 10-20 seconds and the base should automatically find the earpiece. The red power light on the ...

earpiece? I disabled it from my old phone thinking that was the problem, but still no luck hello, . Press and hold the power button until the indicator LED flashes red/blue. The Voyager Pro headset is

...wireless bt-10k earpiece and fogot the steps and code to sinc it with my virgin mobile xtc phone.can you help code is 0000 Pairing: Hold down answer button until light flashes red and blue, then

...button on the earpiece uuntill you see flashing lights (either blue/red or blue/green and let go of the power button Make sure the earpiece is fully charged before doing this as it may fail

...earpiece to my Nokia 6126? 0000 is the passcode The pass code is "0000".I got this info at a Verizon Wireless store. Begin with headset turned off. 1. Press call control button for 6 seconds. Release ...

...and the "PLAY/PAUSE' button on the right earpiece. Keep holding then the LED should flash Blue three times THEN flash alternate RED and BLUE. You should then be able to Pair the Device. Good ...

...flashing, use the phone menu to search for Bluetooth devices and select "220Plantronics." 3. When prompted for a passkey, enter 0000. Headset will flash blue when paired successfully. Had the same ...