Plantronics PL-CS55 Wireless Headset "lifter problems" Questions

dELAY WHEN RECEIVING A CALL I'm assuming you are using a Plantronics HL10 handset lifter. The lifer is what notifies your headset that it has an incoming call. Try turning the ringer volume ...

Quick Red Flashing Light on Lifter All of a sudden today I noticed a quick red flashing light. It's not flashing on the base only on the lifter. I think I just fixed the same problem on mine... My ...

plantronics cs55 problem installed plantronics cs55 and HL10 headset lifter. The lifter picks up and I get a dialtone but then about 2 or 3 seconds later the lifter hangs up. Turn on the wireless ...

...and see if that solves the problem. If that does not help, it could be that the sensor on the lifter is going out. The lifter ships with a ring detector that has a 2.5mm jack on one end

...the system and that doesn't seem to work. Anyone got ideas? It's probably a problem with the lifter. Try a re-subscription on the system (refer to user manual). Also make sure that the lifter ...

Plantronics CS55 Headset I was definitely using the CS55 Headset without a lifter using only the call control button to answer a call and not touching the handset on the phone at all. Our office moved

...call. The ring from the telephone is picked up by the internal microphone on the HL10 Handset Lifter, typically for most phones, the lifter sits directly over the speaker grill on the telephone ...

...is what notifies your headset that you have an incoming call.  If you are using the handset lifter and are not receiving the 3 short beeps in your ear piece there are a couple different

ear piece Hi, I have my PL CS55 all hooked up, everythign works perfect, I can hear dial tones, the lifter works, etc. The only problem is that when I receive a call, it's not beeping in my ear piece.

...to find a fix for this in the users manual I had the same problem and the cause was the handset lifter and not the earpiece--if the ringtone is too low at the lifter, it won't be detected and ...