Xante Ilumina Digital Color Press Printer "removing superglue" Questions

paper Jams (xylophone effect) Minolta Magicolor 2200. Paper folds up right before drum. It comes out of the paper tray then gets shoved into the drum right before it is about to put the toner on the ...

...10" long, strips are vertical position, held by 2 phillips screws)" located on the back wall after removing all 4 toner cartridges. I found that the plate had cracked and didn't allow the toner to ...

HP PSC 1350 printer won't feed paper My HP PSC 1350 printer is not working. It appears that the paper feed is not working. I've tried cleaning the rollers and checking for a paper jam, but the rollers

Printer Error I have a Canon Pixma iP4300 printer. It won't print because it thinks the paper output tray is closed, and it is not. I have tried opening and closing it over and over, turning it off ...

6400 'out of paper' but paper IS in tray my kids pulled a paper jam out of my printer, apparently the wrong way, and probably damaged a sensor or something, anyway, now the printer thinks it has no ...

...removing the original tape cassette with a new one doesn't fix the problem. This is probably due to a broken nylon pinion gear, the one which meshes with the capstan drive motor. Due to poor design, ...

automatic document feeder pulls paper through only part way the motor keeps running but paper stops then error message says paper jam in auto document feeder remove paper jam and try again but it ...

Upper Paper Tray light flashing as if not all the way when it is. I have a Tektronix Phaser 860. The light contniues to flash saying the upper paper tray needs to be replaced but it is sitting in the ...

Epson Artisan 800 ADF jams ever time. THere is no paper in it and I've unplugged it and restarted it multiple time. Havn't had it that long. 1 year or maybe a bit more. There are two gears that are ...

Problems feeding 70# announcement envelopes-5.5 bar. Jamming in the fuser 2 things. Fuser is worn, even if % says still has life, but if less than 40% say, then fuser could be slipping. next with the ...