Eiki LC-XG210 Projector Multimedia Projector "fan temp sensor" Questions

...Temp light. I then took a table top fan and powered the unit up with this 'added' cooling. Again the unit ran for 30 seconds and shut down with a Temp light. I know the unit is definitely NOT ...

...or thermal sensor? if you projector auto shut down, and Lamp LED Light - Check Lamp - Check Lamp Driver - Check Main Board b. Temp LED Light - Check Thermal Sensor - Check Thermal Switch - Check ...

...fan can't throw out to make projector cool enough so temp sensor activates and send over heat signal to system control chip thus projector shuts down. Please install original lamp that comes with ...

...temp comes on because the fan is start slow down, so the bulb produce a lot of heat. Once the maximum temp reach, the temperature sensor will become inactive. So boxlight shutdown. First you need to ...

fan stays on low and unit shuts down. Power temp and lamp lights flash. Where is the sensor for the fans and can I replace it? YES! This sensor is for sale on Ebay.... http://cgi.ebay.com/ws/eBayISAPI

...of the dust that could be causing it to overheat. also make sure the fans are spinning. if it still blinks, replace the temp sensor. if it overheats alot, the sensor will wear out from excessive

over temp light comes on at start up. one or more of the fans may not be working. also clean the projector out with canned air. if all else fails, replace the temp sensor.

+hp vp6320 blinking red temp light red temp light Check ur inside fan and sensor

fan kicking in late in a movie, maybe 1.5 hours in, so my guess is that it's related to the temp sensor and I'll have to have it serviced. Any ideas on what else I could try? Thanks! Hi There, Yup you

...then goes off, fan powers on and I have to pull the plug to switch it off, no matter the room temp it thinks it's overheating. clean it out and try it again. you may need to replace the temp