Sirius Satellite Radio S50-TK1 Satellite Radio Receiver with Car Kit "signal display" Questions

display reads "acquiring signal" and three bar... The display reads "acquiring signal" and three bars are displayed for signal strength but the receiver fails to connect and transmit to the car radio.

...OR RADIO. THE DISPLAY SHSOW THAT THE SIGNAL IS BEING RECEIVED WHICH XM CUSTOMER SERVICE CONFIRMED. IS THE RADIO BAD? IT IS 4 YEARS OLD. No not the radio...i thing the ear hones are ...

Drops signal as soon as location changes Have a Kenwood Sirius receiver with amplified marine antenna on 50ft sailing catamaran. System works fine alongside home dock until the boat is underway and ...

...display "aquiring signal" again for the next 5-10 minutes, It's a bad Sirius tuner. You can find them on ebay for 50 or so rebuilt and they are better than new. It's cold solder joints on the antenna ...

...Signal" on display. I called-in asking for the signal to be resent, but still "No signal". try a replacement antenna. if that dont it could be a bad cradle. if that dont work you may have to return ...

unit shows 3 bars for signal strength yet the No music from Sat Radio. Unit shows 3 bars for signal strength and displays station info, yet the screen also says its aquiring signal go figure! This is ...

SIRIUS Sportster "Acquiring Signal" I've seen several folks on here talking about the same problem, but I'm still pretty unclear on the solution. My SIRIUS Sportster will regularly show "Acquiring ...

Unit is not locking onto signal My H2E is 1 year and 3 months old. Problem: Unit is not locking up to signal. When first powered up it beeps and displays the Sirius logo. This last for 5-7 seconds and

Sirius Receiver goes silent and displays Acquiring Signal. I have a Sirius Model SV3 Receiver that is about 3 years old. About 3/4 of the time the receiver goes silent and displays Acquiring Signal. ...

...display shows "acquiring signal". The symptoms remain the same after I replaced the antenna. Checked the signal strength in the menu and saw that the signal strength was sufficient. Now, I ...