Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum "flow indicator" Questions

...flow indicator that should be cleaned after each use. To get to it you turn the Flow indicator cap counter-clock wise, lift the rotor out and the then the filter. Ensure you replace the filter with ...

...flow indicator. Turn the Flow Indicator cap counter-clockwise to remove it. Lift out the rotor and the filter is under it. Remove it and clean. Reinstall in reverse order. I don't know anything about ...

...bag is full, but is not. Look for air flow restrictions, like plugged passageways. sometimes it is difficult to get to every part, but with restricted air flow, you could have the indicator turn

...out water? Check Water Tank Cap Filter (it looks like a screen). and, check the Flow Indicator Filter (under the Flow Indicator). If that didn't help the try the Bissell Consumer Care at ...

flow indicator not spining flow indicator not spinning. any ideas ? Yes I also had this problem after just one use. There's several things that you should check. 1. pull side panel off where the belt ...

manual says it's under the flow indicator but beyond that there are no instructions on how to access it. The clear cap on the flow indicator unscrews and the spinner and filter can be removed to clean

...at nozzles including hand held. Check your filters. Flow Indicator Filter: Turn Flow Indicator Cap counter-clockwise to remove, lift rotor and filter out. Clean filter and replace in reverse

...flow indicator is going as soon as I turn it on and it appears as if water just continually comes out. It acts as if the spray trigger is always being pressed (thus the flow indicator always turning ...

...cap, and then the Flow Indicator Filter (turn the Flow Indicator Cap counter-clockwise and remove, lift rotor and filter out. Clean filter and reinstall in reverse order) Consumer Care # ...

...Flow Indicator: Unscrew the Flow Indicator cap to remove it. Lift out the rotor and the filter is directly under it. Lift the filter out and clean. Replace in the reverse order. If that didn't work ...