Question about Dyson Vacuums
...button won't engage brushes Dyson dc25 off button won't turn off, brush button won't engage brushes Hi ... did u get this fixed cos mine is the same hve to switch off on the
...won't turn. I have removed all lint but can't find a tool to take out the screws (not normal phillips head or flat). Maybe there is hair wrapped around the roller. I managed to get some out ...
...brushes won my hoover carpet scrubber the brushes won"t turn (1) Remove the brush block and assure the presence of the square drive pin on top of one brush. It should be about 1/4 inch square, two ...
...brushes turn best when the handle is tipped back. If this does not work, remove the brush assembly and insert a flat screwdriver into the square hole that the pin on the brush usually fits into. Try ...
...won't turn when powered Bissell powerforce brush won't turn when powered on. Smells of slight burning rubber. Hose still has suction. removed bottom panel, belt is not broken, don't see ...
why won't my brushes turn why won't my brushes turn most likely stripped gears on the end of the brushes. (beltless model?)
...won't turn on my Panasonic MC-CB467 brush won't turn on my Panasonic MC-CB467 There should be a safety reset button. So like if you suck up a rug it will shut the power to the brush roll ...
...won't turn There is a good chance the belt is broken. The reason belts break is because the brush seizes up due to hair wrapping around tight at the ends of brush. Inspect closely with a flash ...
...brushes won,t turn,belts were checked,power on ,vaccum tilted,brushes turn with no problem by hand? If belts are ok then possibly needs new front brush motor replaced. remove the lift off and assure ...
...brushes won't spin. I put new brushes on and it still doesn't spin. Usually when the brushes won't turn it is due to a bad turbine. Insert a screwdriver into the square hole that the pin ...
121 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions