...there are a number of different strips that can be installed in a 2.5 tn unit... Take the wattage and divide it by the voltage and you'll get the amperage... watts/voltage = amperage ...
Question about Fedders Heating & Cooling
...wattage and amperes my voltage in philippines 220 volts,I lost my manual cos of heavy flood My technician asking what wattage and amperes in your air con. You shouldn't need the manual. There should ...
...doesn't list wattage, but it does list amps, then just multiply the amps times the voltage to get the watts. For example: amps x volts = watts x .30if you dont have any information you are
Question about Frigidaire Heating & Cooling
...6000 btu Please help me to get how many watts in a Fridaire Air conditioner approx 6000 BTU check your name plate voltage and current rating, multiply it and the result is the wattage of the
Question about Heating & Cooling
...online and ill get back to u Thank you There is a panel on the aitr conditioner that has all the information on it including Make model, serial number and voltage and wattage or amperage. Look for
...wattage of the unit running, multiply the voltage (220?) by the amp draw (marked on unit) The problem I am seeing is the initial amp draw is prob. going to be close to 60 amps, and I am not sure if ...
voltage and wattage its all erase so i need your help to determine the details about this kinds of capacitors. that i need to buy now . it doesnt work that way. If the cap is metal it is a run cap, if
Question about Fedders Heating & Cooling
...wattage of the unit and that causes the breaker to trip. I would be better for the unit if it were plugged directly into a wall outlet, because there is less a chance of voltage drop which would burn ...
wattage by the name plate, the take the voltage and multiply by the amperage, this will give you watts. Next multiply the wattage by 24. (watts per hour x 24 hours) Finally divide this number by 1000.
...voltage and wattage or amperage rating on it somewhere. I would start there. I would also have to lean towards the wiring diagram. It should show 2 lines of power, usually L1 and L2, and a ground and ...
36 questions posted
Usually answered in minutes!
48 Questions
38 Questions
38 Questions
29 Questions
27 Questions