Avanti W789SA Top Load Washer "machine lid switch" Questions

Ad

Question about Kenmore Washing Machines

1 Answer

...machine top where the lid closes. It may be a plunger on the lid that activates the switch or a white plastic flat piece where the lids sets. Either scenario can be checked by jumping out the lid ...

Ad

...machine with the lid closed sometimes gets the machine to start again and then continues onto the last cylce. But this will not work all of the time. Can you help with some advice as what I might be ...

Ad

Question about Ariston Technologies Washing Machines

1 Answer

...machine around the lid opening to cause this switch to close. Other times it is on the hinge side of the lid and the protrusion is formed right into the metal of the lid itself to push a plunger on ...

...lid, the machine starts. It appears that the lid is contacting with the switch. Should I replace the lid switch? You may can slightly bent the part the lid contacts so it will be depressed further ...

Question about Kenmore Washing Machines

2 Answers

...machine to run with the lid open when it goes into the spin cycle,if you send the full model number located beneath the lid when it's open on the back panel under the lid.let me know how you make out ...

Question about Whirlpool Washing Machines

1 Answer

...lid switch. Disconnect the machine from the power source. Gently pry the emblem from the front of the machine and remove the T20 torx screw hidden behind it. Slide the top of the washer forward and ...

Question about Washing Machines

1 Answer

...machine If this is a top loader then check the lid switch. A common failure is the lid switch fails. Inspect the lid to make sure the plastic component "Lid Switch Actuator" Has not broken off from ...

...machine the lid locks however once the water starts filling the lid unlocks, the washer sensor is not stopping the water at the appropriate levels, and the machine is not spinning. Yesterday the ...

Question about Washing Machines

1 Answer

Machine-Troubleshooting#repairHelpVideoTabs Some machines have a special lid-switch fuse near the lid switch, inside the control panel. If this fuse blows, the unit won't fill with water until you

Question about Samsung Washing Machines

1 Answer

...machine was spinning i opened the lid and shoved another article in and now the machine doesnt spin anymore? my machine is a Samsung WA13G7Q1 There is a switch under the rim which the lid actuates -- ...

Not finding what you are looking for?
Avanti W789SA Top Load Washer Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top Avanti Washing Machines Experts

Kolbrun...

Level 3 Expert

1228 Answers

john h

Level 3 Expert

29494 Answers

Jorgie  the...
Jorgie the...

Level 3 Expert

5639 Answers

Are you an Avanti Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...