Maytag MFI2568AES Stainless Steel Bottom Freezer French Door Refrigerator "lower hinge cam refrigerator door" Questions

...lower hinge be moved to raise sagging side? Most likely cause is a worn cam in the hinge. After a while plastic cam wear out a causes doors to sag. Take your model number to Searspartsdirect.com and ...

...hinge to replace the lower cam but the cam on the door can always be replaced. You will have to order the cam by model number and can do so on this website AppliancePartsPros.com. On side-by-side ...

lower hinge, and it's easier to purchase the lower hinge complete rather than try to drill out the old rivet. If the cams you are replacing are for the freezer door that has a water line going through

...hinge assembly and an extra cam is shipped with it. The cam assemblies can easily be replaced by using the information on the Partselect.com website that refers to the GE TFX22R refrigerator. You ...

Lower hinge kit - Kit includes hinge, upper and lower door closure cams" Does this sound right? that is what helps your door close..if the cams are broken the door will drop down and may drag..if that

...sure Hi, The bottom cam should be in 2 parts, one on door and one one lower hinge. Sounds like your missing one of them. I would replace both of them at the same time to fix the problem. Good ...

...lower hinge that assists the door in shutting. This cam is made of plastic and the weight of the door tends to grind away this part quickly. To see if you have the cam and it's worn, lay on the floor ...

...the door, the problem may be a worn hinge cam, if it is replace it. If the hinge is loose tighten the bolts. Once the door is off you will see how the lower hinge can be adjusted. Hope this helps! ...

lower cam ? Remove the top hinge cover , and the 3 top hinge screws . Then , lift the refrig door , off the bottom hinge . Set the door on the floor , and tilt slightly , enough to get a nut driver or

...pick the door up? thanks sonny Is This country Great or What you need the lower hinge and cam kit. remeve the top hinge then lift the door off the hinge and replace the hinge and the cam on the