Maytag MFF2557HE Bottom Freezer French Door Refrigerator "pcb faults fridge" Questions

...PCB beside compressor back of fridge, Interface is display panel front of fridge). So if freezer is cold and fridge not, try a fan motor. If compressor doesn't work either comp is faulty or PCB has ...

...pcb fault I've a whirlpool FF400 Elite fridge, Everytime i switch it on the cooler fan runs for abt 5 secs and the fridge turns off, ive consulted the whirlpool agents in my country, but they did no ...

...pcb as it is in the door - can anyone help please? Also I was checking out for loose connections at the main control board at rear and on return of supplies I now have the display fully blank except ...

pcb and the temperature sensor for fridge located ? Either the thermostate is defective or refrigerent blocked or leaked or the relay is not functioning properly. Only on inspection of the above parts

...fridge, and there is A LOT of frost on the back of the freezer wall. I don't know if these are two good or bad things (since I know little about fridges) the defrost system has failed. to get it ...

faults This unit is a big larder fridge and has served us well. It was not cheap! The unit has developed a fault and the green LED indicators continually flash. These LED's are what you use to set the

...fridge and freezer cool properly to the temperature selected but we will come back later and it is not cooling and the numbers have returned to just dashes. It will be unresponsive for a bit and then ...

...fridge got problem... Model: SJ-PT71R-HS. Fault: front panel no display,fan motor and LED lamp no function .only the compressor run.... Checked main PCB mounted back side of Ref. If Main PCB is ok ...

...fridge only worked on three. Then two and now not working at all. I believe fault with control PCB. How do I reach control PCB to do faultfinding and repair? why not just change the relay on the pc ...

...fridge / freezer still works fine . Does the PCb need replacing ? Will, Your remarks on the "odd shapes and symbols" is definitely indicative of a PCB fault, most probably caused by a surge of sorts. ...