Question about Maytag Neptune Washing Machines
Washing machine it shuts down water filling cycle Everytime when I start the washing machine it shuts down water filling cycle within few seconds. Is something clogged? water filter(s)? here are they?
tiny holes in clothes Our front loading Maytag washer continues to randomly give back clothes with several randomly placed tiny holes through the material, especially with T-shirts. Not always and not
set of Maytags lasted about 40 yrs. I got them as hand-me-downs from my parents in 1995 and lost them to a relationship break up, hence my neptune TL purchase. I hope this is something I can repair my
...Set the multimeter to the ohms setting X1. Place a probe on each terminal. The multimeter should display a reading of infinity. Depress the button on the lid switch and the reading should change from ...
Question about Maytag Neptune Washing Machines
...Set the multimeter to the ohms setting X1. Place a probe on each terminal. The multimeter should display a reading of infinity. Depress the button on the lid switch and the reading should change from ...
Question about Maytag Neptune Washing Machines
2002 Maytag mah5500 leaking water onto motor. Have checked all hoses and bellow where they attach and they are dry. A small mirror appears to show water leaking down from clearance between tub and ...
...set the cover aside. There shouldn't be many exposed wires or ends, but a few. Don't touch the terminals or lay something metal in the machine that could fall on the terminals. 5. Take a flashlight, ...
...agitator and I don't see any hole (s) for a set screw. Look toward the bottom end of the agitator. There should be a small indentation where a 10mm screw is. This screw holds the agitator the the ...
agitator with 3 set screws in it that you had to screw into the outer plastic of the agitator. A gear puller was then needed to pull the agitator off. Don't know if its worth it considering the age of
...of clothing stuck under agitator Check on the side of the agitator on the lower half for a small set screw. It's hard to see but you can feel it. remove this screw and the agitator should come
520 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
175 Questions
151 Questions
