Question about Maytag Neptune Washing Machines
...Wash Cycle which Wash Cycle did you have selected? Are there any error codes to the LED display like dC or uC? If you stop that wash cycle with the wet load and do a Spin Only cycle will it complete ...
Question about Maytag Neptune Washing Machines
...cycle with no clothes in the wash basket. Set the Spin setting to Spin/Hang dry seting and start the cycle. It should take about 10 min complete. Does the Spin Only cycle complete with no clothes in ...
Question about Maytag Neptune Washing Machines
wash cycle, washer locked & will not unlock even if unplugged First the washer on any cycle the water would not stop, needless to say the water ran and flooded my house. Now it had been running ok
Question about Maytag Neptune Washing Machines
...on spin cycle... spins for few seconds than beeps and stops If you want to DIY the fix see this post My washer starts the wash cycle, but then will not go into the rinse and spin cycles. What do you ...
...wash cycle is that correct. When the wash cycle fails does the Cycle Status LED indicate that the washer is in the Spin cycle? With a empty wash basket no wash load in the basket and you start a Spin ...
Question about Maytag Neptune Washing Machines
...wash cycle but the counter is not counting down and it goes no further than the wash cycle. Just continues to do this the whole time. Model # FAV6800AWW Here are some handy links if you are going to ...
Question about Maytag Neptune Washing Machines
...the fix? Let me know and I will try to help?..Rich i have the same exact problem....no error codes....it does it when its on the wash cycle and on spin cycle...spins for 5 secs. and stops and ...
...Cycle with no clothes in the wash basket 1. Open the lid and rotate the wash basket by hand Counter Clockwise, CCW. The wash basket should rotate freely with no restriction. The wash basket will not ...
Wash cycle are running to long The cycle times have doubled in amount of time. THE Light soil level has gone from 25 minute s to 55 FIXED Maytag Neptune, Timer Problem - ApplianceBlog ...
...wash cycle Fills with water than stops doesn't run the wash cycle . try the spin cycle that doesn't work neither. The drain pump cycle works. I think it might be the MOTOR? But not sure. sounds like ...
167 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions
151 Questions