Maytag Neptune MAH6700A Front Load Washer "open tape dispenser" Questions

open during either the washing cycle or one of the spin cycles. Then the softener does not get desepensed and or there is water on the floor. Any way I can get the door to stay closed? Maybe a new one

...dispenser housing. Or the drain hose (large black hose attached to the front of the drawer housing) to the washer may be crimped or clogged. I set up a video to tape my machine and saw not a little ...

...dispenser and leak out the front door. I had same thing with MtgNeptune frnt loader. Manual sed may be a kink in the front drain hose, caused by sudden burst in water pressure. Not in my case. A ...

...open lead on the magnetic reed relay, lid magnet out of position and corrosion on the male pins and plug assembly. The last alarm is the ?FL? error code for failed to lock again corrosion issues ...

...open the dispenser drawer. Use foil tape to seal hole if you don't want to buy a new dispenser. Clean out blue plastic dispenser parts so detergent will siphon out completely. Pushing down on the ...

open the soap dispenser door. To remove top: Remove the bottom screw from the plastic clips on back of the washers top. next, stand in front of machine and, using the palms of your hands, sharply push

open. Here's what I would do: Take the two screws off the back plastic parts which are attached to the top cover. Leave the ones in that go into the cover, just remove the bottom one on each side. Now

...you took out the dispenser door, a magnet may have fallen out. from the front part. you may need to tape a new one in. 'dispenser door open' may be the error bc the magnet isn't there (acts as a ...

...open. As you say you have the top cover off, you might try shining a light into the top side to see if you can see where the hang up is, and then drilling a small hole in the plastic and poking ...

open. Then, use foil duct tape to seal the hole. my name is joyce The thing that I would suggest to you seeing that its not under warrenty you can take the top of the machine off and remove the drawer