Maytag Neptune MAH6700A Front Load Washer "med" Questions

mel dew on rubber around washer door I have a neptune front loader how can I remove the med dew around the rubber part around the washer door and get the smell out of my washer this started when we ...

Walks out of its space during med to high spin cycle This is probably either the motor mount at the bottom of the machine has come loose or the "shocks" are disconnected or worn out. The front of the ...

...manual and do this Board Output test and make sure the pressure switch makes the transition for Low/Med level. My Hi level portion of the pressure switch stopped working recently my fail safe for a ...

1985 Matag Washer I have a 1985 Matag washer. It seems I have noticed small oil stains on my clothes. Could this be from the washer and if it is how can it be repaired? I have always been able to ...

...connection off to stop filling check to make sure the control knobs are turned to exactly small -med -or large - if it's in the middle of say med and large loads the water will over flow - this ...

...when filling It sounds like your fill selector is bad this is the switch that you select small med or large loads. There is a rubber vacume line that runs from it to your washer drum as water ...

...AND IS AT 48 INCHES OFF FLOOR. MODEL IS WJRE5550H1WW WE HAVE IT ON EXTRA SPIN AND WE MATCH LOAD; MED SIZE LOAD / MED ON COTTON SETTING I have the same problem, I called GE and they said there is ...

can't see water leverage why can't i see water in clothes during wash or rinse cycles? water level needs to be brought up alittle on your amount of level as in small med large loads...

load size knob is out of sink with the size of load. everything still works, just the knob won't land on the small, med or large setting. Its spelled "Sync" idiot.

water drains after spin but clothes are still wet what type of detergent are you using, and how much per load(small, med, large)