Hunter 52" Ceiling Fan With Light And Remote Control "wrong switch works high" Questions

...switch. technically your compartment (or room provided will determine which to use). I'd suggest you replace it with one like the one that no longer works. The one good thing about fans the direction ...

...wrong with the power supply, or the remote, the speed switch in the fan is faulty, as it is more finiky than a manual speed change(like with a cable) It seems like the 1uf capacitor is in parralel ...

...doesn't work you have the wrong switch. It might look the same on the outside but that doesn't mean it's the same on the inside. You might want to check your capacitor to make sure it's not going

wrong, or how to fix. assuming you havent messed about with the wireing it can only be the pull cord switch fault or the motor is on its way out I bought my Aloha ceiling fan 7 days ago.I installed it

...wrong switch. How it all works is... When you turn the fan to High, or position 1 on the switch (there's L 1 2 and 3) the power goes from 1, to the capacitor, but does not go through the capacitor, ...

...switch seems to have no effect. What have I done wrong? Many times, a simple three speed fan motor has one wire for each speed - and a "common" wire, for a total of 4 wires. The common wire is ...

...wiring is wrong. You can access the switch from the bottom of the fanwhere the light kit is connected. the wiring could have gotten mixed up when the light kit was installed. Is your problem

...wrong direction since my blades are reversible? I had a hampton bay fan that absolutely did not have a revers switch on the fan anywhere! MOST fans bought today will reverse. I was not about to give ...

wrong with the solid state circuitry (everything worked but the motor!), but a quick test of the motor indicated it does work. The motor uses a start and run capacitor. I decided to change controls to

...wrong with your fan.---ha-ha! sorry,it just seemed too funny to me. Sounds like:----option #1------- your fan motor is either not running at proscribed speed (fer instance, high is not high enough or ...