Question about Concord Fans Dryers
...3 speed fan controlled by 3 speed wall switch; fan hums on low, louder hum on medium, and high position eliminates hum but speed reduced to low. Is it the fan or the wall switch? Check the capacitor ...
...3 speed ceiling fan switch and don't know which wires go where - 3 speed fan switch, 4 wire unit. Hi The pull switch has 4 wires, L, 1, 2, 3. Connect ' L' to the reverse switch red wire or the wire ...
speed wall switch on my ceiling fan. It is made specifically for fans. Problem is it doesn't work. If the slider is full on the fan spins. If I unadjusted the slider the fan turns off. If the wall
...at variable speeds. Installing a 3 wire variable speed ceiling fan switch didn't work. Once the current drops the doors start to close and the motors cut out. Is this possible? Just do a wall ...
...speed control for the fan. Wires coming out of switch are Blue (for light) Green (ground) Black (to motor) Black/White (AC). My question is if you only have a Black, White, and Green coming from the ...
remote to run the fan on high. 2. Pull the fan speed chain until the fan reaches high speed. 3. All speeds should work normally now. The remote is modulating the maximum speed as set by the pull chain
...3 speed pull chain switch, not a double pole one like cheaper/new fans have that use capacitor speed control, we are using cap. speed control, but not the same way they do. So you want an "SP3T" ...
Question about Minka Dryers
I have a minka wall control (WCS213) controlling a ceiling fan (F502-BCW) but I cant get the blades on fan to turn on, everything else works perfectly. I have tried turning power button on and ...
Question about Craftmade International Dryers
...3 speed pull chain switch.$4.50 to $6.00 at home depot or lowes or hardware/elecrtical store. how 2 replace switch. 1.turn off breaker to fan/fan lights,probably that whole room. may need extension ...
600 questions posted
Usually answered in minutes!
251 Questions
153 Questions
60 Questions
24 Questions