Hunter (25417) Ceiling Fan "won work" Questions

My Fanimation Islander FP320 stopped working, I've replaced the wall switch but fan won't spin and lights won't dim. My Fanimation Islander FP320 stopped working, I've replaced the

My control won't activate the light on my Hunter fan. The light comes on via pull chain fine, and the control works the 3 speeds on the fan, but the light won't respond. My control won&#39

...but the fan won't work The light works but the fan won't work Was it an add-on light? If so, pull the light switch once and try the remote again. If not, you probably need a new

Hunter 5 min fan lights quit working. Can I just wire straight past the limitor y59 r 130c and be fine. This won't start a fire will it? That's perfectly fine. Worked for me

t Replaced pull chain switch and lights still won't work. The fan does work. As there are only two wires for the light kit I would say you have a bad switch or bad light kit. Send a pic if you can

...won't work you are damaging your stereo with heat from the fireplace. Move it to another place. Oh that does not mean in front of the heater. You have probably melted the heck out of the poor ...

work out in combination to give you about the same performance. But if the bigger fan has a much flatter pitch, you might find it won't deliver as much air as your old fan did with the old blades.

...Holmes 1touch model HAWF2043. it was working just fine, then just quite working and Walmart won't take it back. why did it stop working in such a short time? Dav Holmes 1touch model ...

minka aire f608 top won't screw on I've had my Minka Aire eMotion f608 for years now and never had a problem. I recently heard it making a lot of noise while spinning. I turned it off and took off

...work The fan won't operate, but the lights work properly so I know there is power to the unit. It has been working properly for the past 9 year. Then one day the fan stopped working, but the lights ...