...remove the wattage governor. There should be 3 screws holding your light assembly on. Remove these screws then disconnect the white rectangular plug in connector (this is what connects the fan wiring ...
...wattage than permitted. Replace the lamps with same as original. If it still flashes, you could remove the light limiter and wire direct. the limiter have a capacitor 470 mf 6.3v this capacitor ...
remove wattage limiter Don't think you can.
fan, for lights. and wire the lghts directly. this should fix problem. the watt governor is a small black box to reduce wattage on the lghts. just remove it and wire lights directly. have a good one !
Question about Hunter Dryers
...remove a wattage limiter in a Hunter Fan Light Kit You Tube says I can circumvent the limiter without any problems. Currently, the lights blink and do not light continuously like it is supposed to. U ...
Question about Dryers
...still works fine. What make/model of fan is it? Are you using the correct wattage? You might have a short in the light kit. Remove it and check for any bare wires that might be touching
remove this part and wire-nut the wires back together bypassing it (black/red to black and white to white). This will get your unit back to normal and the switches will still work. I spoke with Hunter
...I can turn the fan off and on but the lights till won't work. remove black box in fan , it is there to reduce the lighting wattage. remove watt governor and rewire lights directly. this should
...remove watt governor or ( black box ) then wire lights direct. this will get rid of problem. governor part # 98480-02, hope this helps!! watt governor is on inside for the lights, it is supposed to ...
i need a replacement part for a rhine pl-190B this part does not work A PL-190B ceiling fan module is is a Wattage Limiter rated at 190W maximum. It is about 1" square and has a red, blue and white ...
216 questions posted
Usually answered in minutes!
251 Questions
60 Questions
24 Questions
