Monte Carlo (5LCR52MW) Fan "speed control pull chain switch" Questions

speed.Either reset to original setting or to chain control If you mean you put in new pull chain switches, then I'm pretty sure you have the wrong switch. What is the make/model of fan. How many wires

...control ceiling fan doesn't go real fast. the highest speed is what a normal fan would do on medium. is there a fix? if you have pull chain switches in addition to the remote control, your pull chain ...

...a 3 way switch Do you mean 3 speed switch? The question says your fan has a remote! Pull chain switches are different. If you need a pull chain switch call 1-888-830-1326 with the model # of the

...speed too fast Even on it's lowest setting, my Hampton Bay fan is too fast. We bought the size recommended for the room. Is there any way to manually adjust the motor to run slightly slower? Is there ...

...control, the light works fine but only one fan speed works. DIP switches are matched. The light is only a battery indicator light. Check the capacitor in the switchcup. Small, usually black box with ...

...control. High speed is no faster than medium speed. The remote has been replaced but did not help. Could the wiring be wrong. Previously no fan switch on wall as new fan installation. However was 2 ...

...controlled by a single switch, that switch will now turn on the fan and light and you have to pull the chain to shut the light off and pull a different chain to turn the fan on and select speed. ...

...speed is in the off position and when I go to try to pull the chain and get it going it is very tight and will not move or start the fan. I am worried that if I pull too hard it will break the chain ...

fix this problem? Is there a replacement part for this speed control circuitry module? Might need a new capacitor (black box with wires going to pull chain switch). Did you replace the switch recently

...pulled out of Fan Speed Pull Chain Control Switch. Can I pull apart the Control Switch and re-hook the pull Chain, or must I purchase a new control switch go to purchase another control ...