Hoover S1361 Bagged Canister Vacuum "power cord wind" Questions

power cord is loose, power cuts off power cord is loose internally, power cuts off, must pull cord against return spring to a certain position to get it to restart If its the Auto wind cord then fault

...power cord on the spool just enough so you'll have a small amount of tension on the cord when you put everything back together. It's possible the spring has become weak with use, but a rewind may let ...

...power cord on Hoover vacuum. The power cord on our Hoover U5465-900 bag less Wind Tunnel vacuum cleaner needs to be replaced. How can I gain access connect a new cord? I have removed the handle but I ...

...power to vacuum Hoover wind tunnel turbopower 7000 (canister vacuum) turned off automatically during use and won't turn back on. try using a couple of different outlets .move the cord around at both ...

...back in Hey Susan! Having the power cord not rewind can be frustrating. Here's a quick link to troubleshooting steps to assist you: ...

...power cord is stuck inside. You need to take apart the reel. The cord is wound over itself and kinked. Be careful taking apart because if it gets away from you, you will have to wind the spring by ...

power cord. The same thing happned to my Hoover concept one... working fine and just stoped. In my case one of the 2 motor windings failed (high speed winding). I had used it just over 45 seconds when

power cord won't retract on anaerus 5500 vacuum cleaner What you can do is take out the six hex screws on the bottom of the machine while on it's back. When all the screws are out, flip the machine ...

...power cord through the outer shell that you removed (you will need to unscrew and remove the black facade that the cord goes through otherwise the head of the cord wont go through). Then take the ...

...cord to be sure plug in but dont turn on the vac see if it gets hot if no then your motor is drawing to much power. check the brush see if it moves easly with your hand and UNPLUGED if it does not ...