Hope you can help under the vacuum, there is a guard. remove the guard , either by 2 screws or by 2 clips. there is a belt under the guard. that is connected to the brush. the belt need to be replaced
...brush guard by turning the two release fixtures. Remove the guard. Pry the brush out of the head. Remove the old belt. While the brush is out remove any build up of hair and lint off the ends that's ...
Brush Guard for Roomba 780? I've been using my Roomba 780 on a tiled floor and one of the wires on the Brush Guard has worn through, which subsequently damages rugs etc. Where can I gat a replacement
Question about Riccar Vacuums
brush. Step 3: Remove the belt guard that sits to the left of the roller brush, and is a metal part that protects any dirt & debris from going over to the belt. Here's a picture of that part being
...brush guard, and remove the main brush. 3. Reinstall the brush guard and run the Roomba without the main brush or dust bin. Is the flexible brush turning? If yes, go to step 4. If not, please skip to ...
Question about Dirt Devil Vacuums
...guard, use Phillips screwdriver to remove the screws. 2. Lift and remove brush roll and dispose of old belt if you see one. 3. Slide belt (style 19) onto motor shaft. 4. Place new belt on area of ...
...brush guard. 2) remove the brushes 3) remove any hair or debris using the cleaning tool 4) replace the Roombas brush bearings 5) replace brushed and brush guards If this doesn't work then, try the ...
...brush guard not clicking back in place after cleaning everything looks okay? brushes not all the way in .if they dont fall into place easily you may need to pull the funny looking yellow ends on the ...
33 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions
