...new belt on clean the motor shaft .usually when a belt breaks it leaves burnt rubber on the shaft .if you don't clean it the new belt won't last long.please leave feedback.i hope i was some help to ...
Question about Bissell Vacuums
...new belt? If not, try a new belt. If so, check to make sure the beater bar will spin freely without a belt attached. If it spins without a belt attached, make sure the bearing blocks at both ends are ...
Question about Hoover Vacuums
...new belt keeps sliding off and taking it apart is a lot of work. This is the best vacume ever, so I want this to work. One compatible belt that I use and works (at least while its new) is Royal ...
Question about Dirt Devil Vacuums
...new belt on my dirt devil featherlite repeatedly slipping off? Everything else on it works fine and the b elt is the correct size. The original belt slipped off after 2 yrs of use, so I replaced it. ...
Question about Bissell Vacuums
...and typos. Did you 'replace the belt 2 times' with a new one? If they stretch, they can come off. https://www.google.com/search?q=belt+on+my+Bissell+Pro-Heat+Shampooer+for+the+pump+keeps+coming+off
...small metal wheel causing the aggitating brushes to stop. Over time the belt stretches and gets to big to stay put all of the time. Get a new Hoover belt and install it. That will solve your ...
...turn The belt keeps slipping off so the drum won't turn replace the bel, is worn, put a new one. Of course before try to adjust the tension of belt, for moving a little the motor. God bless ...
New Eureka vacuum cleaner belt keeps slipping off I need to replace the belt (part 61110a) on my Eureka 4870 series vacuum cleaner. The new one is *very* tight when I install it and after a minute or ...
new belt and not a worn one. After only a short time, belts stretch and need to be replaced. for orecks it is usually the fan housing has loosened everything. your belt will slip. if your vac is under
Question about Hoover Vacuums
...new bag on. Now when plugged in keeps smoking and belts are slitting and small back is burning will move now but belt is smoking and burning. ? you probably need to replace your brushroll seeing that ...
64 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions