Akai PT4298HD Rear Projection Television "red focus" Questions

Red want focus I can't use the magic focus to focus the red it will not line up" The fault can be on the convergence board, or in the HV multiplier. Jerry G. red will not line up at all did auto focus

...focus shows red though can't get red color in picture, tried magic focus and there is a bright red showing on screen when magic focus running. All other functions seems fine, picture good, just ...

...focus the red lamp. Auto focus helps a little bit, but picture is still very out of focus with red streaks and shadows. Problem happened overnight. Model # 61UWX10B. does the red look like its 3D or ...

...Focus. (In this case RED CTR) It is located on the neck of the CRTs. They are the first set of adjustment rings up from the CRT Boards. If any of these focus adjustments are off they will cause a ...

...fixing the right side screws up the left side. The magic focus ends on the red screen with 3 lines below the center word. Also the red seems to be the problem when we try to manually focus it. ...

...red. Magic Focus doesn't help. It stays on the red during magic focus and then stops and a little green 5 shows up in the bottom right hand corner. Rach, if it doesn`t move from green to red to blue ...

red will not focus but blue will ...perfect focus stops in middle red will not focus.....and when you run perfect focus on tv it goes about half way and starts over again....after a couple times it ...

...focus block for red only. this will affect the white balance of the set so adjust it carefully. the focus block is located on the front inside the set. remove the speaker cover then the 4 screws on ...

...red lamp is out of focus or lacking sharpness. (similar to the blurriness when not wearing glasses.) I ran perfect focus in the customer menu, but it hangs at 20% because the red crt is not bright ...

touch focus error when using touch focus. Red, touch focus error when using touch focus. Red, green and blue out of sinc Defective convergence ic's and bias resistors.