Akai PT5598HD 55" Rear Projection HDTV-Ready Television "green noise black colors samsung" Questions

green hue on the screen,what is the solution to my problem. Hi,It sounds like it could be the color wheel or DMD.The color wheel is a rotating disc that has a gamma of colors it spins at high rpms.The

...noise and all pictures are black & white. Your color projection drives are fried. Usually Red, Green, Blue. Cheaper to replace the set than to replace the drives and have the set re-alligned. ...

...noise. I thought it was fan #2. I replaced the fan and began getting a This is typically your color projection drives going out. Soo the picture will go black and white, and the hum will prosist. It ...

...green or black). What could the problem be? I have taken the lamp out and it looks okay, but not completely sure. Check ur owner manual or call Philip support Tech. ask it this tv model have a colors ...

noise but there is no picture (completely black). It then powers off and back on again and no picture. It does this another 1 or two times then powers off leaving 3 flashing lights (bottom right). The

...noise coming from the back of my tv. Then the tv shuts down. The three light go on. Two on the top green. One on the bottom. binking red.Turn on the next day and the tv works fine. The picture and ...

...green but it only temporarily stays. How can I fix it so it stays permenantly? I have cleaned the lenses but it continues to do the same. Ur convergence is dead.Must know how to solders.Must replaced ...

NOISE AND ALL THREE LIGHT START TO FLICKER ON THE TV THE BULB IS NOT LIGHTING UP LIKE IT USED TO.. BUT SHOULDN'T I BE ABLE TO HEAR THE TV WITH NO PICTURE??? NOT SURE WHAT TO DO ??? Replace the lamp to

...green/black colors after replacing with new color wheel..what is wrong? Is it a bad color wheel? I had a beautiful picture with old wheel, but the old wheel was noisy..now noise is gone, but I have ...

...up, and the green lights on the front acknowledge when I press buttons on the remote. I replaced the bulb about six months ago, and there is no noise from from the color wheel. Possibly DMD