Magic Chef CGR1110 Gas Kitchen Range "happens ignitor stove gets" Questions

stove. Ignitor problems Even if the stove is off, the ignitors will click by itself and becomes annoying. I unplug the stove everytime it does this. By next morning, I plug the stove and seems to work

...ignitor. part # 12400035 @ $70.00 My oven will not heat up, the broiler setting works as well as the self clean but nothing happens when I push the bake button. have a smell coming out of the stove ...

...ignitor glows bright yellow but nothing further happens. Any suggestions would be appreciated This is usually the ignitor not getting the right resistance to open the valve. The other possibility is ...

...stove; and if this has anything in starting the oven. before I just turn to knob to 250 or so and the oven gets hot don't know what happen? sounds like an ignitor you may need a service man but the ...

...happens. there is no gas sound or smell and very little heat is being produced. does anyone know what the problem could be? thank you. Find the bake ignitor (you may need to remove bottom drawer or ...

...happens there is ignitor in the oven and it has a heater on the ignitor in oven. This heater will heat up to desired temperature and once it reaches the that temperature the ignitor will ignite and ...

...stove top work. Fan also seems to work, but the oven bake/roast modes to not work. The oven just reads 100 degrees. We bought ours summer of 2005. Seems like a common problem with GE after 3-4 years. ...

stove eye it seems like that allows gas to start going to oven burner then oven will stay lit & new valve & regulator makes squealing noise Hi, Sound`s to me you need a new hot surface ignitor

stove, and when I turn on the oven to bake I smell gas and my oven will not light. I see the red glow like it's trying to light but nothing is happening. What do I do? i think you probably have a weak

ignitor comes on. Right side back is infrequent at best. This all happened at once. Ignitors aren't clogged and gas is getting to right side OK. Can there be a clog somewhere or is this a sensor issue