Question about Washing Machines
...is humming? Provide some detail clue. It can be caused by many reason. You may try to replace the starter capacitor (C2 on the above diagram). I guess the starter capacitor may not good enough to ...
AGITATOR DOESN'T SPIN AND MAKES HUM NOISE. BUT SPIN CYCLE STILL SPINS Check for a broken or loose belts for starters.
washer makes a lot of noise during spinning we need the brand and the model but for starters, please check on the links below. ...
My Kenmore washing machine, model number 26812690, won't agitate or spin. It goes through all the cycles but the tub doesn't move if its a direct drive , make sure the brake is releasing for ...
...start the washer it does not fill with water it goes straight to the wash cycle Hi, The pressure starter is faulty kindly replace the pressure starter even after replacing the pressure starter if ...
...to unblock it last week and it worked fine for a few washes. You may have burned up the motor's starter windings. About the time it eases up to speed, the motor overheats, and shuts off. Five or ...
...spinning & tumbling at any cycle. Have limited knowledge on multimeter use, but door lock/switch appears to be in working order. Belt around motor in excellent condition. Motor wants to spin (for ...
...a repair man? Parts that can be responsible are motor and motor control unit, the motor has a starter capacitor built inside the motor assembly, or in the motor control unit . I do not have ...
...cycle starts, but will not spin after water is gone Hi, This may be problem with the pressure starter kindly check it then the spinning coil of motor may be short circuited kindly replace the ...
...If both are ok the motor power supply and coil is fine means you are suppose to check the pressure starter since it is giving the signal to the wash motor to run kindly change the pressure starter
23 questions posted
Usually answered in minutes!
46 Questions
36 Questions
34 Questions
10 Questions
4 Questions
