sagi dishwasher not draining My dishwasher is not draining. Take the drain hose off and use a vacuum cleaner to see if you can suction anything out. Or you can use a garden hose to back flush.
...Does anyone know how I can empty the rinse aid compartment? Vacuum out with a wet/dry shop vac. Suction will pull most of it out. Then fill with water and do it again. You should be good to
...rotor from ours we put about 4 inches of warm water in the dishwasher, then took our shop vac and vacuumed from the center hole where the rotor was and the suction cleaned out the passageway from ...
...it wasn't getting things clean and the filter had stuff stuck all around outside, and was vacuumed in, and bent, like there was too much suction. I thought there was some kind of disposal ...
...suction of a vacuum over the inlet hole be useful? this is very common if the filters are not cleaned regulary if you remove the arms and soak them in hot soapy water for around half an hour this ...
Question about Dishwashers
vacuum, remove its filter from the motor(so it doesn't get wet), remove the drain line from under the sink, try to suck out the water with it. Sometimes, the high suction from a wet-dry vac can free a
Question about Fisher and Paykel Dishwashers
...vacuum and blow out the entire area ore use the suction... there are many sensors down there and water gets up and into the controls unit ... you have to get it DRY... DRY.... DRY... then set the ...
3 questions posted
Usually answered in minutes!
118 Questions
95 Questions
90 Questions
67 Questions
58 Questions
