...high flame or doesn't go to high flame it is a component called an FSD ( flame safeguard device) 2) If the oven does go to high flame after you have lit it but goes low and stays low then it is the ...
Question about Explorer Appliances Kitchen Ranges
...flame is at desired hight (aprox 2mm). now turn up to high check that high is satisfactory if high is to low then adjust screw. check low again. adjust till both setings are acceptible. do for all ...
flame no longer gets high it stays low as if the oven has got to the correct temp,but its only warm BLOCKED JET MAYBE CAUSED BY FOOD SPILLAGE OR BLOCK IN PIPE TO JET the flame failure device( FFD) may
Question about Explorer Appliances Kitchen Ranges
...flame is at desired hight (aprox 2mm). now turn up to high check that high is satisfactory if high is to low then adjust screw. check low again. adjust till both setings are acceptible. do for all ...
Question about Tappan Kitchen Ranges
flame burning too high when oven is lit on a tappan 110 series gas stove All parts are brand new but the flame for the oven burns too high. How can the oven flame be adjusted for the new parts? ...
Question about Frigidaire Kitchen Ranges
flame is too high on Frigidaire GCRG3060AFH. Recently converted the propane. Checked air aperture and opened up. Flame is still too high with no change whether they're open or closed. Suggestions? did
...to as low as they will go, but they are still too hot (high). How do I adjust the regulator to get the flame down? are you natural gas or lp and is your range set correctly is your flame blue or ...
Question about Kitchen Ranges
...flame is high. As the heat increases in the oven, the flame reduces in size until the burner is running on whats called "bypass rate" or "maintenance rate" This is the smallest flame the burner can ...
Question about Frigidaire Kitchen Ranges
...high.I adjust the flame to lowest position(clockwise)The flame is still to high.Please help me.Thnk you.Baky. Try counterclockwise There is an adjustment on the burner or it could be a gas pressure ...
...flame is too high I recently bought a new range, the GLGF382DSF...I had to convert it from natural gas to LP which was done. When I turned on the oven, the flame was coming out of the sides and too ...
31 questions posted
Usually answered in minutes!
29 Questions
16 Questions
11 Questions