Candy 17 in. CS455 Built-in Dishwasher "not start" Questions

...the light above the start button blinks and will not start LOCK LIGHT STAYS ON AND WILL NOT START. I HAVE TURNED THE POWER OF AT ELECTRICK PANEL AND IT STARTED ONE TIME. BUT DID NOT START ANYMORE. ...

...not start. I have replaced the door switch interlock, and also the control board and it still will not start. What else might be the problem. The dishwasher would not start so I gave it a minute and ...

...not light up. Other lights on the front panel light, but the washer will not start. are you getting water into the machine? if not it will not start up. you may need the water inlet valve

not start the wash until it reaches the delayed hour that it was set for. Example: 1H = 1 hour delay start, 2H = 2 hour delay start, etc. To start the dishwasher immediately and not wait for the Delay

not start. Try gently pushing on the door as you push the start button. If no joy, then check to make sure that the latch mechanism (what can be seen of it - usually very little!) has no food deposits

...not start, so I pushed 'cancel' button and then re-entered 'start' button, still nothing happens. after a few seconds the start button light flashes My dishwasher Model is 665 15891790 and the serie ...

...not start. When I select a cycle and press start the dishwasher lights up but will not start. You most likely have a defective door switch or possibly a bad key panel. Frigidaire had a large quantity ...

...not start. please help cycle and options buttons light up but start button does not light up and dishwasher does not start Check that the door is closing all the way and that the latch isn't damaged ...

...start button not lighting up and dishwasher not starting. All other buttons light up except the start button. We fixed the door latch that was broken, but start button is still not lighting up or ...

...start. The lights flash when the door is not shut all the way, or the sensor that detects that the door is shut is not sensing the door is shut. Try pushing in on the door while hitting the start ...