Question about Whirlpool Washing Machines
gear was loose. Simple tightening down of the nut was an easy fix for me. But some times those plastic gears between the drive pulley assembly and transmission crack or the teeth wear down (think it's
...you can spin the agitator freely with your hand. There are gears inside the agitator that are very cheap and relatively easy to change they are called agitator dogs. Dont forget to rate my solution ...
...gear. It is very important to keep the machine correctly timed. The kit is cheap $35, flip the machine on its back and remove the plastic cup in the center and then the c-clip and remove in order ...
...spinning slow but was able to make speed quickly. The oil seal on the gear case did start leaking though. This should be a cheap fix that could be done by most people with some mechanical
...gear box, then and relatively cheap to replace agitator. goodluck. Ash You need a new agitator dog. Ask your appliance parts guys about it. Pull off the softener body, remove the cap and remove the ...
...it keeps stopping It sounds like the timer has a bad spot in the tiny gears. May be able to find a cheap timer on
gear box, the motor can not turn it in the reverse rotation. tnx 4 using fixya, drcool Ebay item number 200262803398 is a cheap PDF repair manual for that model. prem These machines must have all been
...online with make and model to find a new timer. or call a appliance repairman. the timer might be cheap. also many appliance stores have timers. ...
...gear to wear out much faster because of the play between the rotor and spyder.Anyway, I tightened up the bolt and the washer is now running fine. Of course, it will not hold in the long run, but at ...
...gear (plastic with teeth) and the other parts leading down to the agitate spring and cams. The cams are about $15. and the spring should be relatively cheap also. Using the part numbers from the ...
133 questions posted
Usually answered in minutes!
44 Questions
37 Questions
30 Questions
30 Questions
22 Questions
