Question about Hotpoint Washing Machines
...open. There are clothes inside and it is still full of water which has turned black. Is it wort repairing and what could be the problem. Any help would be gratefully received. the inter locks at ...
Question about Washing Machines
...water level at about half full or greater). Is there a seal around the top of the bowl that can be replaced to fix this problem as the leakage creates smoke - presumably from leaking onto the drive ...
Question about Hotpoint Washing Machines
...smoke came out of the drum when the door was opened and filter was full of black water. Worth getting someone to look at it or scrap? The main drum bearing on gone. If its not under warranty, its ...
smoking washer Amana NAV8800AWW Actually the washer was full of water, and had been agitating for about 1 minute when it stopped and started smoking..... it wouldn't do anything for about 15 minutes, ...
...should move freely in the water or tumble easley in the dryer not just rotate around. they are mostly old maytags but some GE and Kinmore Thanks Half full of clothes dry is the maximum for long
Question about Washing Machines
...full, it will just make a buzzing sound and the wash cycle won't start. Sometimes, if I just leave it on, the buzzing will go away after a few minutes and it will finish washing. My roommate tried ...
...front - which is full of smelly water! Tried draining but not working at getting this drained! Help me please!!!! Ally i need a motor circuit to test the motor of a defy automaid it does not spin ...
...water but it will run all the cycles dry... what is this and how can I fix? Replace the pressure switch , it must be stuck in the full position If you are running it dry I am surprised there has not ...
...full of smoke with a bad burning smell as if it was on fire. Water was still in the washer so I unplugged it. It is a White Westinghouse top load washer. your belt has failed . replace the drive belt ...
...water) from the pump hose spaying the motor and causing vapor. 3. There may be a exposed wire from vibration rub during the "spin" cycle and is grounding against the enclosure. These are just a few ...
67 questions posted
Usually answered in minutes!
90 Questions
44 Questions
30 Questions
30 Questions
22 Questions