Candy CN146 Front Load Washer "cycle didnt finish" Questions

...DIDNT FINISH ITS CYCLE!!! AND IT IS A SAFETY THAT IF DOESNT FINISH ITS CYCLE THE DOOR WONT OPEN!!!! I HAD ONE LIKE THAT AND I BROKE IT APART!! AND I SAW THE WATER PUMP WAS THE PROBLEM SO I CHANGED IT ...

...top calypso whirlpool says 8 estimated time remaining 8 minutes left to go. In my experience, it is new that accurate as it gets to the end of the cycle. possible motor went and unit didnt finish ...

cycle and just stays filled with water. Well unfortunately I didnt realise I had it left on fast spin and I put in a load and fast spinned it. then I went on to wash it and it just stopped, it goes to

...If that doesn't fix it you either have a sticking button or a bad logic board, depending on the Maytag model. see if unit didnt finish a cycle possible draining or rinse if all ok bad control ...

second hand machine put it through couple times didnt finish last cycle now water in drum. Door locked light flashing door wont click to lock most likely door lock swith is bad or wires are loose to ...

didnt spin, so the clothes are still wet. Now the washing mashine is not working at all. Is this a problem i can fix myself. Please help! 0I have a candy intergraded washine machine ,could you tell me

didnt finish the cycle due to the pump being clogged the door will remained locked also if the lock mechanism went bad, the machine will stay locked. Remove the top of the machine by taking the screws

...didnt finish the cycle and the in-use light is still on so it haspower..wuz up If the lid switch is defective, your washer can't spin and may not function at all. The switch is inside the washing ...

...cycle like usual, it would stay on forever if I didnt turn it off! Please help as have a newborn n dont know whether to purchase a new one asap. The year and model number always helps but sounds like ...

didnt work. all other cycles work perfect but not the spin cycle. i have just recently moved house and it worked perfect b4 i moved Yuo might try making sure it is still level but I'd just try using a