power went out on the circuit holding the washing machine and now it wont start a cycle. the lights are on and the start button is flashing but it wont start when pressed.. simpson ezi loader.. 5.5kg.
...went back to the machine and tried to put it on again it wont start, the door wont shut and the screen lights up with '0' Remove the plug off the washer and keep aside. Plug back after few ...
Washing machine wont start after power in house went out Will the timer run if you set it?
...power to the machine? ? I did some washing went and hung up the load , came back and it was off and wont turn on... Please help.. Try unplugging the machine for a few hours to rest the code on the ...
Question about Fisher and Paykel Washing Machines
...went well but now the machine wont power up, and the washing smelt burnt - Water Pump cooked? ok, have you checked for power at the power point? if you have power to the machine and the display ...
...went dead. No wont come on or anything. ...
Question about Candy Washing Machines
Power went out during drying it came back on 2min later now wont start what can i do or try replaced pcb Unplug power , wait , re-plug power cord , re start from beginning .
...went to put a new wash on and the on and off button wont work there is no power going to the machine at all Check Power Check the outlet by plugging an appliance into the same outlet the washer was ...
...power went off. there is nothing wrong with power outlet Check the out of balance switch under the top of the machine. The actuator arm often gets bent or jammed and wont allow reset of the switch ...
60 questions posted
Usually answered in minutes!
90 Questions
37 Questions
30 Questions
30 Questions
22 Questions
