Denon AVR-1706 Receiver "aux input sound" Questions

...input to AUX on the reciever. still no sound I think the V-AUX is a video input, not audio. Look for a red and a white RCA female input to connect the cable. Those represent the right and left, ...

with the amp is not correct.  It is now confugured to receive radio.  just select input to AUX.  Just pre 'amp' and then press 'input' repeteadly to select 'aux'

...AUX input. Select audio properties and select and switch the input to AUX so that the input is reduced to match the signal.Hence the audio outputs from receiver can be connected to this input and it ...

...AUX (analog) input on your sound system .. select AUX on your sterio system to select the computers input .. now you should have great sound from your computer . the computer likely provides only ...

...aux input on stereo You should be able to download a manual from the manufacturer's website. The aux input is generally high impedance and low sensitivity, needing more than one volt to obtain good ...

...aux input. Magnetic phono cartridges like the one on your pioneer has an output of about .005 Volts, the standard inputs are looking for 1 to 2 volts for fulol out put, the phono preamp will step up ...

...isolate the problem to either the TT or the PC by trying the TT on some other sound device like a receiver. Make sure the PreAmp Selector switch is ON and plug the TT into any AUX, CD or TAPE

...aux, we get sound but no picture on the television. try another another source that you know works on the vaux to make sure the input is good. you can try plugging your camera into a diff input or ...

jacks. Press the FUNCTION button to select AUX 2 input. The mode switches as follows : DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞ USB ➞ IPOD ➞ FM

...stereo's inputs using another sound source like a cd or dvd player, plug in to the tape or aux inputs on your stereo. if it does , work then check the cable from your phone to the stereo maybe ...