Question about Pioneer Audio Players & Recorders
2 VSX-D903S Units.) There are NO optical (Toslink) or coaxial connections for Satellite or Cable-TV on this Pioneer unit. The coaxial connector on the receiver is for connection to an external antenna
...for AUX input and connect one end of the 2 RCA cables red and white connect the other end of the red and white cables to the back of your cable or satellite box where it says OUT. Good luck N ...
...connect a blu-ray player, also component to the 2nd or 3rd component inputs and assign them correctly in the setup it won't work switching between the two, no matter what I do it allways displays the ...
...2. Now that your components are connect in a way which will enable you to see their media in either 720p, 1080i or 1080p your ready to get the Digital sound to your speakers. On the back of your TV ...
...TV can exist just fine with basic audio from the video sources. And you could still watch it/them without the Pioneer turned of if you want. I can't find the exact manual for free anywhere but if ...
Question about Yamaha Audio Players & Recorders
...connect the tv (monitor) to the receiver do I plug it into the monitor OUT s video or would it be Input not output?" Input on the Monitor from Video Out on the Yamaha. "if I am only using the monitor ...
Question about Audio Players & Recorders
...TV. So, first I changed the input jacks my DVD and Cable box are plugged into on the receiver (e.g. from HDMI 1 & HDMI 3 to HDMI 2 & HDMI 4). Second, I reprogrammed the Input Assignments to ...
...connect to my hdtv If you are using a Cable Box or Satellite receiver, use the digital input on video 2 or the digital coaxial input on video 3. If you are not using an external box, use the optical ...
...to connect the receiver and speakers you may have short circuit even when you think you connected receiver and speakers properly. 2.) Make sure the polarity of the speaker wire matches the
...2 HDMI in for connecting a HiDef Sat/Cable box, a DVD or Blu-Ray player or a gaming console, and then 1 output to the TV. HDMI handles both audio and video. Disconnect the digital cable and just use ...
63 questions posted
Usually answered in minutes!
135 Questions
96 Questions
101 Questions
78 Questions
82 Questions