Universal Remote Control DIRECTV Universal Remote Control "whats aux button" Questions

aux button on my remote you likely have an aux port on the product that the remote controls, it allows your device to open up the pathway to the aux port. eg if it is a sterio unit, then the aux could

...what buttons to press to change codes you must press the SET button And TV or DVD or AUX together then the red led was flashing. After that enter the code and press the TV or DVD or AUX button

...AUX button, all the other mode buttons should turn off,only AUX button should be blinking now, -While AUX button is blinking enter in the remote code742 for the Marantz receiver and then press the # ...

...the +CHANNEL BUTTON once, and press power again. Repeat this until it turn off. Then press the appliance button (VCR,TV,AUX, etc...), this will stop the LED to blink and your appliance will be

button. If programming an AUX position, press and release AUX first and then press the device type to be programmed. 3.Enter the 3-digit code number. 4.Release "CODE SEARCH". With the device on, press

...button that switches to AUX input. I no longer have that remote but have been using a Radio Shack 3-in-one remote. Buttons were accidentally pushed and now I cannot get the TV to switch to AUX input. ...

...button. If programming an AUX position, press and release AUX first and then press the device type to be programmed. 3. Enter the 3-digit code number. 4. Release "CODE SEARCH". 5. With the device on, ...

...button. If programming an AUX position, press and release AUX first and then press the device type to be programmed. 3. Enter the 3-digit code number. 4. Release "CODE SEARCH". 5. With the device on, ...

...AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once. Release CODE SEARCH. Press OFF/ON repeatedly until the ...

...AUX button (about six seconds) on top of the remote until all mode button backlights come on, then release. 2.) Press 0 for a TV, 1 for a VCR/DVD, 2 for any other device then press STAR (*) and press ...