Question about Matrix Star Office Equipment & Supplies
...back up, the feed button does not work and the "online" light is off. What's wrong and how can I fix it? 1. check the usb or parallel cord to the PC to see if it is connected proper ly 2. clear all ...
...With them removed, power the machine up. Leave it on for about a minute. Then power the machine off, put the memory sticks back in and that should fix it. If not get back to me at ...
Question about Office Equipment & Supplies
...off and then back on after a few seconds. If that does not work go to the Printer Control Panel or Printer Utility file and see if it needs to be set up again. There may be a selection ...
Question about Matrix Star Office Equipment & Supplies
...off then back on again and you should be back in business. To prevent the problem in the future if you are not using the printer turn it off and if the power goes off while printing get the printer ...
Question about Matrix Star Office Equipment & Supplies
...it off, I turned it back on, it turned itself off and I turned it back on again, it started off doing the calibration and it took about 5 minutes, but when it was finished I had a working printer ...
...off and back on. Done that. Nothing happens. Cant access from the back. Cant reach into the front.... do auto clean should help paper come lose If u turn off and on without removing the paper wwill ...
Question about Matrix Star Office Equipment & Supplies
...out of it and even slamming the back cover. Nothing seems to work. I need help!!! This is most likely caused by the back cover switch. It is either broken or the lever on the back cover is broken
Question about Xerox Office Equipment & Supplies
to ready. Turn the machine back off, plug the feeder back on and turn the machine back on. The machine seems to forget it has the feeder from time to time. It has to boot up with it unplugged to reset
...off, I turned the power back on, the lamp went back to it's "home" position, and it didn't work. I powered off, put the glass and trim back and powered on, and it worked. I just got lucky I guess. Go ...
Question about Xerox Office Equipment & Supplies
...back off again (remembering to leave it UNPLUGGED from power.) 4. WAIT 60 SECONDS (Very important) 5. AFTER 60 seconds plug it back into the wall and turn it back on. If problem persists call for ...
40 questions posted
Usually answered in minutes!
3 Questions
1 Questions
2 Questions
1 Questions