Mitsubishi WD-52528 52" Television "less bright picture" Questions

...picture seems less brighter lately. Today, the ON button starts the blue lights (power on), I hear fan noises, and then the blue lights go off. No picture ever appears on the screen. Could it simply ...

...is simply past its time. and will need to be replaced ( the lopt is a unit that sends power to the screen or in this case the globes the less the power the duller the picture) good luck hope this ...

less bright and vivid then when it was new. Is this common? Is there a solution for this? I have recently replaced the bulb and that didnt seem to help. It could be your Light Engine. However, I would

bright star lit night sky behind the green lines. Turning the TV off and on does not help. The sound is still working. The TV device menus appear as normal. However, the DVD produces the same problem.

Picture gradually got darker and less clairity I have had my 60" philips magnavox for 7 years and I think the picture tube is going out. The screen gradully got darker and less clear. I have tried ...

...size picture when i give more brightness i will have less picture size Power supply problem. Get into the area and try to find out what voltages are out of spec and repair them as ...

less bright. can I clean the mirror on the inside of the cabinet or something the mirror is usually not the problem----this set has 3 lens that if dirty will make the picture darker and somewhat dull.

...how can i set the best resolution for my TV TH-L42S0K i.e. i) brightness ii) contrast iii) colour Reset it to colors factory setting,colors less 40%. The picture should look good,and colors

...less bright. I increased the brightness high etc...does not brighten bright enough. What could it be? I have an extra bulb new. should I replace it again? thx dan, michigan yes it is time to replace ...

...less pixellated but I cant get the picture to fill the screen, there are black bands each side. I did some reading on the net, try to "calibrate the screen". Try set the input to 1080i, then run the ...