Shure SM58 Professional Microphone "wire" Questions

Beta 52 not working, need wiring solution My beta 52 is not working. It has sound going to the wires, because when i plug it and rubb the wires i can hear it...but nothing coming from the end....now I

I would like to know which wire is positive, and which wire is negative. I can not read the wiring diagram, and it doesnt specify a positive or negative wire. Any body know the answer? I can't ...

...and an xlr connector for it. I looked at the picture of the wiring diagram and it has the White wire going to pin 2, the black wire going to pin e and the shielded wire going to pin 1. This

eighth in microphone jack/wire bad I want to repair a lavalier mic that lost sound. I opened it up and one of the two wires was off the mic. simple enough, I thought. So I soldered the wires... And it

Astatic 636L Wiring On my Astatic 636L microphone there is a red wire & a white wire that come from the mouthpiece . I know where the red one is soldered to as it's still attached ,but the white wire ...

Wires broken off mic cartridge Actually, its a CTM 92. In the mic itself, the black wire is still attached. I want to solder the red and the white one back on again, but there are 2 ways to do it: ...

Reparing a Shure SM58 The small wires under yellow tape connecting the capsule to the wire harness have broken. What is the best way to replace these? If your talking about the coilwires on the ...

Sure sm58 mic wires are broken I can fix but I don't know if green or yellow wire is the positive The wiring is in the User Guide on the Shure website. The Green wire is positive.

...schematic or guide for the 4 microphone solder points correlating with the 4 microphone cable wires (1 black, 1 red, 1 tan/orange(?), 1 ground wire) for the Vtech KidiJamz Studio microphone ...

broken wires on headset My dog took a bite on the headset wire, i repaired the wire and now the headset / mic dont work. Is there a trick to repairing broken wires after exposing the enameled ...