Norcent Technologies DC-520 Digital Camera "please plug card sd error" Questions

...been not a single problem with my camera until now :( Most probably the problem is in SD card. Please try a different card to check. Also perform scandisk on this SD card to check for

...PLEASE HELP. Your previous camera wasn't another Z35, was it? Most cameras will not display pictures that were taken with another camera. The old pictures are most likely still on the card. You can ...

...card, and start over. if not, then cards are luckily pretty cheep these days Hello Please read my guide on the error, http://www.fixya.com/support/r3671823-solve_memory_card_error_card_error I'll bet ...

please plug out card what does this mean It means remove the card. The card is faulty. Replace it. Or, you can see if any of the information at this site can correct the fault: https://www.softwarehow

...PLEASE FORMAT YOUR SD CARD OR ANYTHING first, i had this 'HTTP 400 bad request'.then, i solved it.but now, when i try to get into that website, it started giving me this 'The parameter is incorrect'. ...

...please help me figure out how to install this driver so I can get the pictures off of my camera? don't use the camera to load the pictures. see if your printer or computer have an SD card reader or ...

...please-thanks Dan Hi, You can can donwload the driver here from Polaroid. ...

...plug in the camera nothing happens. Hello OK, if the memory card itself is locked, you might sometimes get this error code. All you need to do is to take out the memory card and switch the lever on ...

...card before inserting it inside your Camera . PLEASE DON'T FORGET TO RATE ! good luck . Dear HayLey, In order to be able to read SD cards bigger than 2 Gb you need to update the firmware of your ...

...purchased a new card (same as first) - same message. Both cards were formatted before use. Please help!!!? Try taking the SD card out then plug the camera into the p.c then format the internal