Question about ASK Proxima Office Equipment & Supplies
Loses source signal to the PC after heating up. We have a Ask Proxima M1 projector that initally works fine but after a few minutes it loses the source signal to the computer and starts searching for ...
Question about Radio Shack Office Equipment & Supplies
...search will not stop. Try unchecking the "auto source select" box. Push the setup button on your remote (bottom row, second from the right), use the arrows (7, 0 , 9, or 5) to move across to ...
locked in searching source constantly blinking looking for source at start up Click menu, go to the third screen, unclick source lock, and select the proper source, remember that the format need to be
...directly connected to the computer? The setting on the projector might be set to auto detect source, could be one reason why when you boot your computer up its detecting for a source where it ...
Question about InFocus Office Equipment & Supplies
...search for a source. I have nothing else connected to the projector except for the digital presenter. I click on the source button on the projector but it doesn't recognize the digital presenter ...
Question about InFocus Office Equipment & Supplies
...then make sure that the source resolution is 1024x768. select auto search source. swap cables. if still nothing, you need to flash the projector with the latest firmware (check the infocus
While Connecting I am Getting Measage that searching Source It is checking which sources are active (plugged in and on). There is an option to just select 1 source as default. --- Please dont forget ...
...source. The search screen stays on and will cycle through the various sources. It won't lock on to the signal. Tried with a DVD playing and with an external Dish Network source through the video in. ...
...menu option,under signal source , select option manual(deactivate auto search) & then connect inputs & try selecting each source from the remote If this does not work then the main board is at ...
...for an extended time. Then after letting it up, hit it briefly one or two times until it finds a source. Make sure that under Projector Setup/Management/ "Auto Source Select" is checked. This ...
70 questions posted
Usually answered in minutes!
148 Questions
97 Questions
97 Questions
61 Questions
43 Questions