Gem Sound TR-150 Speaker "power" Questions

Alesis M1 Active MKII Don't get power / Blue light is off Alesis M1 Active MKII SUDDENLY don't get power / Blue light is off Sure they don't have power? Light breaks all the time on those things. If ...

altec lansing im7 does not power up! every time I insert the power connector, I get a spark, but the speakers do not power-up. Altec no longer makes the power supply. However you can find used ones on

Speakercraft infrared system with AT-1.0 Amplified Terminator, IRC-1.0 Receiver, PS-1.0 Power Supply and IRE-3.0 Emitters. Not functioning - no light on the Receiver and no lights from the emitters ...

logitech z-5500 thx speaker system Purchased system from Amazon. Arrived yesterday. Set it up. Powered up subwoofer. No power to control system. Actions taken. Made sure subwoofer had power (listened ...

woofer not powering on I am having problems with my woofer not powering on. I have taken it all apart and the fuse underneath the circuit board is good. I was wondering about the resistor. Could it be

i have a xenyx 2442fx mixer and ep2500 power amp hooked up to 2 1800x subwoofers and 2 1520 pro speakers. i am using a peavey xr 684f powered mixer to power my monitors. i would like to add another ...

Stereo has no power it's not very loud It makes a humming noise in the speakers when the power is off The most likely cause of any humming is caused by Electrolytic Capacitors, especially as these ...

my mackie swa 1501 when you plug in no power checked the outlet their is power checked power cord good. what can i do I have a mackie swa 1501. I want to use last night but when i plug into the outlet

Power supply malfunction I bought a JBL Venue Sub12 online in early April 2008. The morning of August 3rd I turned it on and it quit working after about 10 minutes. The power light on the back wasn't ...

it is a klh powered subwoofer, which buzzes when plugged in, even though the power switch is set to "off" Sounds like the grounds are screwed up. Try using a grounded wire for the subwoofer input. If ...