Question about Phoenix Gold Car Audio & Video
...positive wires touched eachother If you had the power on, and you touched the speaker + - together, you might have just smoked your amp. The only thing you can hope for is that a fuse is blown. Other ...
...positive/negative terminals and you'd connect the other speaker to the remaining pair of positive/negative terminals. You need to confirm that you have a good signal feeding the amp. If you have ...
...positive and the negative terminals together it probably fried up the transistors. While back I did the same to my amp and poof amp no longer worked. Took the amp apart to find the transistors fried ...
...negative connection. On your amp it will have marked Positive (+) Rem (also +) and Ground (-). Make sure the ground wire connection at the amplifier is tight and free from dust or any other buildup. ...
...positive terminal on amp; the negative terminal of the other speaker hooked to negative terminal on amp, and remaining terminals of each speaker hooked together), will provide the sum of all the ...
...positive terminals are tied together & the 2 negative terminals are tied together? 3.How do you supply 12VDC to the amp? While I'm waiting to hear back from you, I'll try to draw a schematic (wiring ...
...of a sudden it stoped work so i got new fuses and it did it again what do u think? check the wiring to the amp from the speaker like pbabin say the negative and the positive could be touching ...
...positive battery terminal, then quickly touch and remove the negative battery terminal with the "-" wire. The sub cone should move outward, and you should hear a brief thump. If no cone movement, and ...
...positive and connect the negative to the others channel negative(presuming its bridgeable) On a regular 4ohm sub it will be getting 200 Watts of power which is an average thump. Now you put a 6 ohm ...
12 questions posted
Usually answered in minutes!
50 Questions
19 Questions
17 Questions
12 Questions
15 Questions
