NEED JUMPER SETTINGS FOR MASTER HARD DRIVE NEED JUMPER SETTING.WONT GO INTO STANDBY MODE, REBOOTS ITSELF Set The Jumper Setting On Your Hard Disk DriveThe hard disk drive will be detected as 32 GB if ...
I could not set the jumper ID as 3 in Seagate 73 GB model of Hard drive.It has 12 pins at the back of Hard drive. You need a jumper on ID pin sets 1 and 2 (as if you were setting it for both ID 1 and ...
Question about Maxtor Computers & Internet
...it will likely bypass the slave drive. Here is the link that will teach you on how set your jumper settings easily from IDE to SATA maxtor hard disk ...
dell e5420 close lid power problem What is the problem? Open Control Panel, Power settings, Advanced power settings, set to High Preformance, Set Sleep and Hibernate to Never , Set Lid close to Shut ...
what are the jumper settings for a quantum Fireball 20 gb HD to set it as slave looking at the bottom of the drive where the circiut board is ,then turn the connectors towards you, you will see the ...
i have a maxtor quantum fireball plus as 20.5 hard drive. i want to set it to slave. how do i set the jumpers? on maxtor drives, you will find the jumper within a cluster of 9 pins. if you look on the
fixed slave/master settings, installed, but Have the Diamond 20. I installed, see the master, slave correct settings in cmos, why do I not see new D drive listed in "my computer" area along with my ...
Question about Maxtor Computers & Internet
secondary drive. How do i do that? on the drive there should be a diagram for how to set the jumper settings. you want to set it to slave. Remove the jumpers to set as a slave
how the jumper setting is done for maxtor n256j50 If this is an IDE/PATA hard drive then the jumper settings are marked on the circuit board. MA = master SL = slave CS = cable select If this hard ...
...for that printer. When you change any setting when using the printer, it does not remember those settings - only for the job in hand. Setting as mentioned ensures the printer will always use the ...
153 questions posted
Usually answered in minutes!
1,198 Questions
326 Questions