Western Digital (WD3200JS) 320 GB Hard Drive "activity light stays" Questions

light flashes several times, and goes out That is "normal" activity -- the "table-of-contents" is read from the flash-drive (and that I/O activity turns the lamp on) and when there is no I/O activity,

...activity light stays lit but is not recognized. It normally blicks with activity. I had one like this last week. The cure was simple. Turn off the power to the drive. leave it off of 30 seconds and ...

...light alone since I can't feel any drive activity (spinnin)when I touched it. Thanks I believe it's normal as the Freeagent is responding to data on the input (eSata) cable. If you don't like the ...

stays solid when the computer is off, sometimes blinks Is this all normal? Seems perfectly normal, the slow blink while sleeping shows you that it is active but not in use (witched off but immediately

...light that normally indicates HDD activity by turning Red no longer shows activity but just stays Blue. This indicates that the data side of the HDD is not seated properly. Since mine is out of ...

...light stays yellow, and it halts any activity. ok disconnect the hard drive,put the hard drive in an air tight bag/container and put it in the freezer/fridge for about 2 hours then remove the hard ...

...light around the power button stays on and fans continue to spin normal but nothing appears on the screen. I noticed that the hard drive LED blinks green on the startup and after that shows no ...

detects as usb but not the drive, 4 clicks tries to spin Ok on 500gb hdd I run it off a usb enclosure. It does not recongnize in Disk management, when I go to Device manager it detects it as USB ...

...light may flash for 24 to 36 hours after successful setup. This does not necessarily indicate an error. It maybe jst the raid drives "syncing" EVEN IF THERE IS NO DATA. never did get a definitive ...